9010
90189019902090219022

Warom Explosion-Proof

Lighting Technology 

Explosion Protection to EN,IEC

Can be used in Zone 1,2,21,22

Class I

Division 2

Groups A, B, C, D

BAY51-Q Series Explosion-proof Light Fittings for Fluorescent Lamp

◆ Ex e enclosure with explosion-proof components inside.

◆ Safety interlock between enclosure and diffuse, switches off on opening.

◆ Built-in electronic ballast, power≥0.95.

◆ Emergency unit with protections against overcharge and over discharge.

◆ End of lamp life (EOL) rectification effect protection.

BAY51-Q LED Series Explosion-proof Light Fittings with LED tubes

◆Built-in LED driver, wide voltage input, CC-CV (constant current constant

voltage) output, power factor≥0.95.

◆ Emergency unit with protections against overcharge and over discharge.

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

◆ Enclosure in Copper-free Aluminium Alloy, powder coated surface, yellow (RAL1021).

◆ Built-in electronic ballast, wide voltage input, rapid starting, stable performance, power factor≥0.95.

◆ Built-in LED driver, wide voltage input, CC-CV (constant current – constant voltage) output, power factor≥0.95.

◆ End of lamp life (EOL) rectification effect protection.

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

◆ Enclosure in Copper-free Aluminium Alloy, powder coated surface, yellow (RAL1021).

◆ Built-in electronic ballast, wide voltage input, rapid starting, stable performance, power factor≥0.95.

◆ Built-in LED driver, wide voltage input, CC-CV (constant current – constant voltage) output, power factor≥0.95.

◆ End of lamp life (EOL) rectification effect protection.

BAY-H Series Explosion-proof Annular Light Fittings for Fluorescent Lamp

◆ Enclosure in Copper-free Aluminium Alloy, powder coated surface, yellow (RAL1021).

◆ Powder coated wire guard, white.

◆ Toughened glass cover resistant to temperature changes.

BAYD 85 Series Explosion-proof Emergency Exit Light Fittings

◆ Can be used in Zone 1,2

◆ Lighting both in normal condition and emergency condition; When power supply is cut off, the emergency device starts to work; with overcharge, over discharge protection and short circuit protection.

◆ With test push button, convenient to check the emergency function. Press the test push button, the light will switch into emergency condition.

◆ Ultra-bright LED lamp, low power consumption and long service life up to 50,000 hours; energy saving and environmental protection.

◆ Enclosure in Copper-free Aluminium Alloy, powder coated surface, yellow (RAL 1021).

◆ Toughened glass sheet resistant to temperature changes.

Categories: ,